1. ATTENTION returning members. If you are coming here from the old forum for the first time, you will need to reset you password. However, we had an email problem getting password reset links set out to a lot of the email addresses. That problem is temporarily rectified but IF you still have an issue, email me direct at info@thebuildingcodeforum.com and I will give you a temporary password.
    Dismiss Notice
  2. Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by clicking here: Upgrades
    Dismiss Notice

Sprinklers in existing I4

Discussion in 'Existing Buildings Codes' started by kasa, Jul 15, 2017.

  1. kasa

    kasa Member

    Joined:
    Apr 13, 2012
    Messages:
    28
    Likes Received:
    0
    Does an level 3 (2009 IEBC) alteration of an existing I4 require sprinklers to be installed? No applicable state code amendments to consider.

    I'm reading that 801.2 says that 704 then is required to be followed throughout the entire work area. In this instance, work area is about 100% (followup question: could they be required to only partially sprinkle, if work area was, say, 51%?)
     

Share This Page