ADAguy
Registered User
If a height difference exceeds 1/2", lets say 1";
Can I use a series of 1/4" vertical to 1" horizontals to make up the 1" (an alternate means?) (would doing so be grounds for a complaint?)
Or must I go to only a 1/2 slope to achieve the 1" - 11B 303.4 Heights exceeding 1/2" must be via ramps
Some thresholds show 1/4" at 1/2 to 1.5" horizontal to 1/4" vertical to 1/2" horizontal and then descending at 1/2 back to horizontal for a overall total of 1/2" is this ok?
Can I use a series of 1/4" vertical to 1" horizontals to make up the 1" (an alternate means?) (would doing so be grounds for a complaint?)
Or must I go to only a 1/2 slope to achieve the 1" - 11B 303.4 Heights exceeding 1/2" must be via ramps
Some thresholds show 1/4" at 1/2 to 1.5" horizontal to 1/4" vertical to 1/2" horizontal and then descending at 1/2 back to horizontal for a overall total of 1/2" is this ok?