• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Dog Wash

Mr. Inspector

SAWHORSE
Joined
Nov 28, 2009
Messages
4,656
Location
Poconos/eastern PA
Somthing new for me. A dog wash in a pet store. Set up for the public to use. The tubs are 34" high but the faucet is 4'-1" above the floor above the tub witch is 3' deep. I would think that only one of these faucets needs to be in the reach range but 2009 IBC 1109.13 wants all controls to be accessible. Can I call it a sink that the code only would require one sink to be accessible?

What do you think?
 
Sounds like a use specific to the worker, (a work area with limited access except for owner observation?) Title 1 accommodation only?
 
OK. then the bottom of the bottom of the tub will have to be lower than 34" if the walls are 3' high. If I am in a chair how do I get my service animal over a 3' edge even if it is on the floor?

Ah, the unanticipated conditions we run into, eh?
 
Accessible (ADA compliant) do it yourself or self-service dog wash tubs are available; options are a shower room with the turning space. As for the quantity how about 1109.10 . . . work surfaces?
 
Top of tub is 34". What I meant was the tub is 3' from the front to the rear wall. The faucet is on the rear wall 4'-1" above the floor. I would think at least one faucet out of the three tubs would have to be in a reach rancge but it looks like IBC 1109.13 wants all the faucets to be in the reach range. Just one or all 3?
 
Back
Top