Insurance Engineer
REGISTERED
On October 20 at 2 pm Eastern time and again on October 26 at 10 am Eastern, the National Association of State Fire Marshals, in partnership with The Door Security & Safety Foundation (the Foundation), will be presenting a one-hour webinar entitled ‘Fire Door Annual Inspection – Understanding the Fire Rated Opening’. All State Fire Marshals and their staffs are invited to participate in one of these informative webinar sessions. Each session is limited to 100 participants and is free of charge.
If you wish to register to participate in either of the workshops, please go to the following links:
For the webinar on October 20th at 2:00 EST
Registration Web Link: https://www1.gotomeeting.com/register/879646393
For the webinar on October 26th at 10:00 EST
Registration Web Link: https://www1.gotomeeting.com/register/705000473
This one hour webinar will provide you with a more complete understanding of inspecting and/or approving the inspection of a fire-rated opening. This session is based on the requirements of the 2007 edition of NFPA 80 Standard for Fire Doors and Other Opening Protectives. Regardless if your state enforces NFPA 80 or not, this session will leave you with a greater awareness of how a fire rated opening should be inspected in accordance with the International Building and Fire Codes.
The instructor for each of these sessions are long time members of the Door and Hardware Institute and hold the designations of Architectural Hardware Consultant, Certified Door Consultant or Fire Door Assembly Inspector. The instructors volunteer their time in support of the Door Security & Safety Foundation.
If you wish to register to participate in either of the workshops, please go to the following links:
For the webinar on October 20th at 2:00 EST
Registration Web Link: https://www1.gotomeeting.com/register/879646393
For the webinar on October 26th at 10:00 EST
Registration Web Link: https://www1.gotomeeting.com/register/705000473
This one hour webinar will provide you with a more complete understanding of inspecting and/or approving the inspection of a fire-rated opening. This session is based on the requirements of the 2007 edition of NFPA 80 Standard for Fire Doors and Other Opening Protectives. Regardless if your state enforces NFPA 80 or not, this session will leave you with a greater awareness of how a fire rated opening should be inspected in accordance with the International Building and Fire Codes.
The instructor for each of these sessions are long time members of the Door and Hardware Institute and hold the designations of Architectural Hardware Consultant, Certified Door Consultant or Fire Door Assembly Inspector. The instructors volunteer their time in support of the Door Security & Safety Foundation.