• Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades

Grease Interceptor Sizing

north star

Sawhorse
Joined
Oct 19, 2009
Messages
4,104
= = = >

Here is one link to a grease trap sizing calculator....NOTE: There

are others available, so please perform your own due diligence

when researching this topic.

http://www.greasetrap.ca/grease-trap-sizing-calculator.htm



This link is for some articles / publications regarding grease

interceptors.

http://pdionline.org/publications.cfm



This link is an article describing the sizing of the two basic

types of grease interceptors [ Gravity type &

Hyrdomechanical type ] from the Plumbing & Drainage Institute

[ PDI ]....Good article !

http://pdionline.org/Article-Basic-Principles-for-sizing-Grease-Interceptors.pdf



< = = =
 
Top