• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Indoor Air Handling Unit Question

There are exceptions for dwellings and other locations, basically 3 inches minimum on the sides and back and large enough space to access and remove the unit. Had a couple of units in addition to the front service space the manufacturer also needed service access clearance on the side of the unit. Check the manufacturers specs.

Mr. Gregg Harris welcome to the forum and thanks for posting the code sections.

Francis
 
Both manufacturer install instructions and IMC should be followed, 306.2 gives you 36"x80" high, but as always there are exceptions..... 24"x30" working platform may be all that is required....
 
You must log in or register to reply here.
Back
Top