jar546
CBO
What are your thoughts?
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
Is This Electrical Rough Ready?
- Thread starter jar546
- Start date
Not ready for a rough-in inspection IMO.
Will there be a dryer venting box installed in the wall where the flex is dangling, receptacle junction boxes missing, incomplete wall framing and possible other issues like stud guards may need to be installed.
Will there be a dryer venting box installed in the wall where the flex is dangling, receptacle junction boxes missing, incomplete wall framing and possible other issues like stud guards may need to be installed.
Not quite ready. Wires need secured and supported, boxes need to be installed.
We're combo inspectors, so when we do an electric rough we will hit all the other stuff too, which looks like it isn't ready either. I would tell them to call it all in at the same time.
We're combo inspectors, so when we do an electric rough we will hit all the other stuff too, which looks like it isn't ready either. I would tell them to call it all in at the same time.
Mr. Inspector
SAWHORSE
same as above