• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Island Countertop Dimension Requirements??

James Allison

REGISTERED
Joined
Apr 19, 2017
Messages
2
Location
Charlotte, NC
Looking to get more information on the North Carolina Residential Building Codes for the required thickness/length that an island countertop has to be. I heard that if the thickness is less than 3" then it cannot hang over the edge without some type of further support underneath? If anyone can point me in the right direction/provide a link I would appreciate it!
 
CDA,

Thanks for the welcome and I appreciate the comments/info. To be more direct we had a number of groceries and other items concentrated on the right corner of our island countertop and a small corner had snapped off because of the weight. It is made of stone marble installed by the previous owners and would be several thousand dollars to replace the entire marble slab. I was told by one of my friends whom own their own home repair business in SC that if a countertop is 3" or less in thickness and extends more than 10" out without additional support underneath than the previous installers are held liable in accordance with the South Carolina building code law. Quite a mouthful and could be complete BS but wanted to explore if there were a section for NC that specifies requirements on countertop installment dimensions because it snapped under such minimal weight..
 
Not sure why no one else has answered

Two suggestions

Call a counter company, talk to someone that sounds like they know, and ask the question.


If you live in a good size town that has a building offical, call and ask the bo.

I still think it is not in the building code

Other option, depending how much material is left, have a counter company come out, cut it even and polish it

It does not cost that much, I have been pricing to cut my granite
 
Not a code item as countertops are exempt from permit requirements. I have heard everything from 10" to a foot but I imagine it depends on the type of stone and it's natural strength...
 
+ & + & +

James Allison,

One more "Welcome" to The Building Codes Forum ! :cool:


I do not know of any requirements in the IRC, the IBC, or the NC Residential Codes
that will address \ specify the loading requirements of your stone countertops.

Essentially, you have an unsupported, cantilevered element that has failed
because of "weight overloading"........No surprise there, just a succinct statement
of the condition.


In the state in which I currently reside, there is a [ typical ] one year Warranty
on new, "everything above grade", Residential construction.......The foundations
here [ typically ] have a 10 year Warranty........If something fails during that one

year period, then [ maybe ] some type of compensation can be obtained, "IF" that
Contractor-of-Record is still in business........A lot of Residential contractors here,
fold up and go out of business after each house they construct.......The Legal
Community counsels them to "limit their liabilities !"


I found a web site from the Marble Institute of America......The Link is a "set of
Guidelines ONLY" for installing stone countertops.
http://www.marble-institute.com/default/assets/File/consumers/homeownersconsumer_countertop.pdf

There are some dimensioned graphics starting on Page 22.


For specific legal recourse or actions in North Carolina, you would need to contact
an attorney who specializes in Residential Construction Law........This endeavor could
cost you much more than the price of a whole new, fully supported, cantilevered, granite
countertop........I encourage you to carefully consider your options.......Do you really
want to focus your resources on this event, or move on to a whole new, properly

installed countertop of your choice & design ? :D

Thanks for coming to THE BEST Code Forum on the internet, ...bar none !



& + & + &
 
  • Like
Reactions: ICE
Back
Top