jar546
Forum Coordinator
Is there a minimum height that a galvanized eye-bolt is required to be above finished grade when it is used as a point of attachment for a service?
-
Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades
Minimum Height Point of Attachment
- Thread starter jar546
- Start date
chris kennedy
Sawhorse
10'
NEC 230.26
NEC 230.26
steveray
SAWHORSE
My gut said Chris was wrong (but I knew better) and I read all the way to the end of 230.26 and sure enough, there it was. I take the "as long as the conductor clearance is good, why should the eye bolt matter" position. But it might be really hard to comply with conductor height (especially drip loop) if it were below 10'