mshields
Silver Member
Is it necessary to use PVC J-Boxes or some type of non-ferrous metal in MRI rooms.
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
MRI design
- Thread starter mshields
- Start date
Coug Dad
Platinum Member
It varies my manufacturer. They need to get specifics for electrical, sprinkler, plumbing, etc from the source.
TheCommish
SAWHORSE
did one in town here, stanless steel and non ferris piping for electrical, copper sprinkler piping, heavely shelded room all sides, priportaty wiring to the machine and controls.
they carfully check all stuff going into room for mainatnace with big hand magnet
they carfully check all stuff going into room for mainatnace with big hand magnet