jar546
CBO
SUN CONTROL STRUCTURE. An accessory structure consisting of columns or posts supporting an open roof of girders, beams, or cross rafters with or without fixed or operational louvers serving to direct sunlight.
Understanding the New Sun Control Structure Design Codes
The introduction of R301.2.1.1.1.2 and its sub-sections into the building code represents a significant update for professionals involved in the design and construction of sun control structures. Below is a summary of key points:- Aluminum Structure Design (R301.2.1.1.1.1): Before diving into sun control structures, it's worth noting the preceding section on aluminum structures, which sets the stage by specifying adherence to the AAF Guide for aluminum construction in high-wind areas, especially for screen enclosures and the use of vinyl, tempered glass, and acrylic panels. These materials are allowed, provided they are designed to be removable with clear identification for removal at wind speeds exceeding 75 mph.
- Sun Control Structure Design Overview (R301.2.1.1.1.2): This section mandates that sun control structures must be designed by a registered professional, emphasizing the importance of professional oversight in these constructions to ensure safety and compliance with wind speed considerations.
- Design Criteria Based on Risk Categories (R301.2.1.1.1.2.1): Free-standing sun control structures can be designed to resist wind speeds for Risk Category I, while those dependent on another structure for support must match the risk category of their host structure. This differentiation acknowledges the varying levels of risk and structural integrity required based on the structure's design and situational context.
- Operable Louvers and Wind Speeds (R301.2.1.1.1.2.2): For sun control structures with operable louvers, there's a requirement to reposition and lock louvers in the vertical open position when wind speeds are expected to reach 75 mph or higher. Additionally, a permanent, visible warning must be installed to inform about the louver positioning during high wind speeds and hurricane warnings, highlighting a proactive approach to reducing wind damage.
- Electrical Installations (R301.2.1.1.1.3): All electrical components within these structures must comply with Chapter 34 of the code, ensuring that electrical safety is not overlooked in the design and construction of sun control structures.
Educational Takeaways
- Safety and Compliance: These sections underscore the importance of designing structures that are not only functional but also safe and compliant with regional requirements, particularly in high-wind areas like Florida.
- Professional Oversight: The need for designs by registered professionals emphasizes the complexity and safety considerations involved in constructing sun control and aluminum structures, ensuring that designs meet the highest standards.
- Risk Category Consideration: By differentiating between free-standing and dependent structures, the code acknowledges the varied impacts of wind forces on different types of constructions, requiring a tailored approach to each.
- Preparation for High Wind Events: The specific requirements for operable louvers and removable panels indicate a focus on preemptive actions to mitigate wind damage, promoting a culture of preparedness among builders and property owners.