Printing process in Tin Can Factory

[Attararc]

I'm working on Tin Can Factory which is F2 Occupancy Classification [Metal products (fabrication and assembly)], one of production processing is printing on the cans; my question is should I separate the printing process equipment from the rest of production area & consider it as F1 classification (Printing or publishing) or it can be considered as part of can fabrication processing?

 

[cda]

I am thinking part of the process

No use of flammable/ combustible liquids anymore???

Or very limited quantity ?

 

[steveray]

I would have to see how the printing process works...Are they printing or making labels? Paper or plastic? How much is stored?

 

[Mr. Inspector]

printing right on the cans or printing on paper that is glued on the cans?

 

[Attararc]

printing right on the cans or printing on paper that is glued on the cans?

it is printing direct on the tin sheet and then the sheet will be modeled as a can
the product is note stored in the production area

 

[Mr. Inspector]

I would not call printing on metal as a F1 classification (Printing or publishing) but part of the fabrication of the cans (F2)
What is the reason that you want to separate the printing operation and call it F1?

 

[Attararc]

I would not call printing on metal as a F1 classification (Printing or publishing) but part of the fabrication of the cans (F2)
What is the reason that you want to separate the printing operation and call it F1?

I was thinking because it is mentioned between brackets (fabrication and assembly) only for Metal products, so the printing will fall under F1.

thanks all of you for your feedback ..