• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Protecton of Romex NM-B and More

smurf pipe and romex together in stud bay no problem. Zip ties for support unconventional. Assume that there is proper support below the picture and is a panel all is connected to the panel properly. Is the area above some kind of truss built of 2x2.

for NEC wiring protection of 1/4" seems to be met, What is the white wire on the left? I assume that there is no suspended ceiling issues where romex would not be allowed. What are your concerns
 
smurf pipe and romex together in stud bay no problem. Zip ties for support unconventional. Assume that there is proper support below the picture and is a panel all is connected to the panel properly. Is the area above some kind of truss built of 2x2.for NEC wiring protection of 1/4" seems to be met, What is the white wire on the left? I assume that there is no suspended ceiling issues where romex would not be allowed. What are your concerns
Click to expand...
Thanks for the reply. I already have an opinion on this but wondering what others think. Would they pass it or not? White wires are coax on left btw
 
You must log in or register to reply here.
Back
Top