• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Section 402.16 in the 2006 IBC

globe trekker

REGISTERED
Joined
Oct 19, 2009
Messages
1,739
What, if anything, do you require as far as identifying the Fire Sprinkler Rooms,

on the exterior side of the door? Some sort of signage, ...lettering, ...other,

...nothing?

Thanks! ;)

.
 
If more than one sprinkler room on the entire building the addresses covered and the wording "Riser (or Sprinkler) /Alarm Room". The Knox Box goes above this door too. The FDC's get the same (addresses)
 
Riser in red letters (so vandles don't think it's a Mech. Room). As for HLFinsp's example, we use Riser (East, North, South and West) so we know which half is controlled by the riser behind the door. In the event we have multiple risers in the room we require complete floor plan placard on each riser with color coded area of supply. (IFC 510.1) 2006
 
Last edited by a moderator:
Back
Top