• Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades

Section 402.16 in the 2006 IBC

G

globe trekker

Registered User
Joined
Oct 19, 2009
Messages
1,739
What, if anything, do you require as far as identifying the Fire Sprinkler Rooms,

on the exterior side of the door? Some sort of signage, ...lettering, ...other,

...nothing?

Thanks! ;)

.
 
If more than one sprinkler room on the entire building the addresses covered and the wording "Riser (or Sprinkler) /Alarm Room". The Knox Box goes above this door too. The FDC's get the same (addresses)
 
Riser in red letters (so vandles don't think it's a Mech. Room). As for HLFinsp's example, we use Riser (East, North, South and West) so we know which half is controlled by the riser behind the door. In the event we have multiple risers in the room we require complete floor plan placard on each riser with color coded area of supply. (IFC 510.1) 2006
 
Last edited by a moderator:
You must log in or register to reply here.
Top