jar546
CBO
Would these welds require a special inspection?
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
Welds - Tilt Walls & Special Inspections
- Thread starter jar546
- Start date
- Featured
TheCommish
SAWHORSE
What does the RDP statement of special Test and inspections submitted before the permit was issued list as needed?
jar546
CBO
I have no idea. I was just there to do electrical inspections in 2019. Just thought this would be a good topic with different opinions.
TheCommish
SAWHORSE
I would say yes, part of the structural systems holding up the roof, tilt wall with roll bar trusses at a higher level
steveray
SAWHORSE
Shirley I could get there is a few different ways...Although those welds looks decent....
Exception: Special inspections of the steel fabrication process shall not be required where the fabrication process for the entire building or structure does not include any welding, thermal cutting or heating operation of any kind. I
1705.2 Steel construction.
The special inspections and nondestructive testing of steel construction in buildings, structures, and portions thereof shall be in accordance with this section.Exception: Special inspections of the steel fabrication process shall not be required where the fabrication process for the entire building or structure does not include any welding, thermal cutting or heating operation of any kind. I