platinumaa
Member
- Joined
- Jun 24, 2012
- Messages
- 17
hello all, 1st post here in awhile. i am remodeling a quadplex in florida. we installed new 4/12 slope 2x4 pre-eng wood truss roof w/ plywood sheathing and standard shingles. we were suppose to install fire treated plywood 48" on each side of the firewall but it didnt happen. we now need a 1hr UL detail. anyone have a ul detail they can suggest that we can use? ive been searching for awhile but cant find anything. i need it to extend down from ridge 48" each direction with 5/8" gypsum secured to bottom of existing wood truss top cord. and blocked off perpendicular with a 2x4 (or something). if not, any other assembly that would work? i could use a spray assembly but trying to use the material we have onsite if possible
thanks for the help!
thanks for the help!