---------- Forwarded message ---------
From:
DSPS SB Building Tech <DSPSSBBuildingTech@wisconsin.gov>
Date: Thu, Jun 6, 2019 at 1:15 PM
Subject: 1107.6.2.2.1 RE: (2) Type A units required, but (4) unit types
To: Ryan Schultz <ryan.schultz@openingdesign.com>
Ms. Ryan Schultz:
Thank you for contacting the Department of Safety and Professional Services.
The code does not require which of the four unit types should be chosen. If there are multiple buildings on the site, then they types of units that are not found in the other buildings is required by federal fair housing rules. Code intent would be to place them in the two most dis-similar unit types, rather than in the most similar unit types found.
From: Ryan Schultz <
ryan.schultz@openingdesign.com>
Sent: Thursday, June 06, 2019 10:52 AM
To: DSPS SB Building Tech <
DSPSSBBuildingTech@wisconsin.gov>
Subject: (2) Type A units required, but (4) unit types
Hi,
Let's say code requires your building to have (2) Type A units.
Since it says you should distribute these units across the various unit types, what happens when you have (4) different unit types. Is there a stipulation on which (2) out of the (4) unit types should be Type A?
Thanks Kindly, Ryan