RJJ
Co-Founder
Have a plan for a Auto body shop and spray booth to be added to a car show room and repair garage. How would you classify this occupancy! Thinking H2!
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
Body Shop Occupancy!
- Thread starter RJJ
- Start date
globe trekker
REGISTERED
- Joined
- Oct 19, 2009
- Messages
- 1,739
Re: Body Shop Occupancy!
RJJ,
Possibly an S-1 ( see Section 311.2 in the `06 IBC ) as long as they do not plan to exceed
the allowable quantities of hazardous materials listed in Table 307.1(1) in the `06 IBC.
The spray booth should have its own restrictive requirements - - see Chapter 15 in the
`06 IFC.
RJJ,
Possibly an S-1 ( see Section 311.2 in the `06 IBC ) as long as they do not plan to exceed
the allowable quantities of hazardous materials listed in Table 307.1(1) in the `06 IBC.
The spray booth should have its own restrictive requirements - - see Chapter 15 in the
`06 IFC.
hazmatpoobah
Bronze Member
- Joined
- Oct 17, 2009
- Messages
- 60
Re: Body Shop Occupancy!
The introduction of a spray booth does not warrant a Group H classification. By definition, a spray booth is an appliance - the only way you can get to a Group H-2 is to exceed the MAQ and to construct a spray room.
I agree with Globe Trekker: It's a S-1 unless you have a large amount of hazardous materials, which is pretty unusual given that this industry only purchases what they consume.
The introduction of a spray booth does not warrant a Group H classification. By definition, a spray booth is an appliance - the only way you can get to a Group H-2 is to exceed the MAQ and to construct a spray room.
I agree with Globe Trekker: It's a S-1 unless you have a large amount of hazardous materials, which is pretty unusual given that this industry only purchases what they consume.
RJJ
Co-Founder
Re: Body Shop Occupancy!
It seems that they are proposing to use or generate less then 220 lbs a month based on the waste hauler report/contract I just received. This will keep them out of EPA issues. And the new pdf plan has been revised down in total area.
It seems that they are proposing to use or generate less then 220 lbs a month based on the waste hauler report/contract I just received. This will keep them out of EPA issues. And the new pdf plan has been revised down in total area.
globe trekker
REGISTERED
- Joined
- Oct 19, 2009
- Messages
- 1,739
Re: Body Shop Occupancy!
RJJ,
As long as they have approved type of fire [ storage ] cabinets for the materials,
you should be able to classify it as an S-1.
The plans DO have rated wall separations planned for the "addition-to-the-existing
-building", ...yes?
RJJ,
As long as they have approved type of fire [ storage ] cabinets for the materials,
you should be able to classify it as an S-1.
The plans DO have rated wall separations planned for the "addition-to-the-existing
-building", ...yes?
RJJ
Co-Founder
Re: Body Shop Occupancy!
It seems that the revised plan went from a 2600 sf room to an actual booth. Storage and containment issues I guess will be addressed. I hate these pdf's the design guys fire out for a first response. Half baked junk!
Repair shop with a booth I would have gone the first time with S1.
It seems that the revised plan went from a 2600 sf room to an actual booth. Storage and containment issues I guess will be addressed. I hate these pdf's the design guys fire out for a first response. Half baked junk!
Repair shop with a booth I would have gone the first time with S1.