• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

"California’s New 6-Foot Fall Protection Rule: What Residential Contractors Need to Know "

Joe.B

SAWHORSE
Staff member
Joined
Dec 4, 2020
Messages
1,811
Location
Myrtletown Ca

"As of July 1, 2025, California will adopt a new standard for fall protection in residential construction, lowering the trigger height to 6 feet across the board. This update brings California’s rules in line with federal OSHA standards, and it’s expected to affect a wide range of trades — particularly roofing and framing, but also siding, HVAC, solar, and finish work."

In my opinion building inspectors should not be enforcing OSHA standards, but I think it's a good "community service" mindset includes informing the community of new rules.

Side question, how many of you (or your staff) go up on roofs?
 
I went on roofs when I worked for LA County. When working for a 3rd party there were several cities that would not allow accessing a roof. That makes it difficult to inspect some HVAC.

As far as enforcing CALOSHA goes, The County provided OSHA training the purpose of which was for our own safety. I did on occasion stop someone from doing a stupidly dangerous thing. It couldn’t have happened more than a couple dozen times. Only once was a contractor willing to challenge me. Understand that the construction workers are mostly young Hispanic people that will do whatever they are told to do. I have seen gratitude in their eyes when I took charge of the situation.
 
Last edited:
Back
Top