darcar
Silver Member
- Joined
- Nov 12, 2009
- Messages
- 129
Take a look at this picture and tell me if you see an issue OR what what point cutting the end of a cantilevered beam becomes an issue.In this particular case a ouble 2x12 beam was angle cut at the end for appearance, but only 4" was left before the angle took off.Additionally the spacing of the joists are at 24" OC instead of the more common 16"OC.This particular builder takes the minimum code and pushes that as much as he tyhinks he can get away with it.Outside of consulting an Enginerd, I don't feel comfortable making the determination on each deck. I'm not the designer.Thanks for your input.Fire away!
View attachment 1743
View attachment 1743
/monthly_2012_12/deck.JPG.19d9596f51a7edb98d4901d92e4fac38.JPG
View attachment 1743
View attachment 1743
/monthly_2012_12/deck.JPG.19d9596f51a7edb98d4901d92e4fac38.JPG