jar546
CBO
I have a 1.2 million square foot s1 with a small b section. It is brand new and I am involved for the first time for a fit out as a company will occupy part of the facility. I was not here for the initial build of the structure. Most of the exit access travel distances are from 350' to 396'. Section 1016.2 does not apply as the vents are not installed.
I have a report from an engineering firm requesting approval via compliance alternative IBC 104.11. In PA, we did not adopt Chapter 1 but that is another issue.
Anyway, the premise of the alternative to meet the "intent" of the code is that both the large volume of airspace within the facility along with ESFR sprinklers are sufficient. They are stating that the NFPRF and FM have concluded that smoke and heat vents are not cost effective and have an adverse effect on the effect of sprinkler systems.
I am providing you with a basic overview. The submission for Means of Egress Analysis includes timed egress calculations and a comparison analysis of heat release rate and clear height.
I will also post this in the fire section for more responses.
Anyone have any experience with this?
I have a report from an engineering firm requesting approval via compliance alternative IBC 104.11. In PA, we did not adopt Chapter 1 but that is another issue.
Anyway, the premise of the alternative to meet the "intent" of the code is that both the large volume of airspace within the facility along with ESFR sprinklers are sufficient. They are stating that the NFPRF and FM have concluded that smoke and heat vents are not cost effective and have an adverse effect on the effect of sprinkler systems.
I am providing you with a basic overview. The submission for Means of Egress Analysis includes timed egress calculations and a comparison analysis of heat release rate and clear height.
I will also post this in the fire section for more responses.
Anyone have any experience with this?