-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
jar546
CBO
Re: Follow the cord
I am missing something. I follow the cord and find a power saw. What did I miss?
I am missing something. I follow the cord and find a power saw. What did I miss?
Guest
Re: Follow the cord
From the saw the cords goes up the roof, over the ridge and down the curved roof. There is no valley on the left side of the ridge. There was no vantage point to get a better picture but the cord should be in a straight line. They had to remove the roof framing down to the plate line and start over. In the end it turned out ok.
From the saw the cords goes up the roof, over the ridge and down the curved roof. There is no valley on the left side of the ridge. There was no vantage point to get a better picture but the cord should be in a straight line. They had to remove the roof framing down to the plate line and start over. In the end it turned out ok.
RJJ
Co-Founder
Re: Follow the cord
YA! It is just a crap job! :roll:
YA! It is just a crap job! :roll:
Mac
Gold Member
Re: Follow the cord
Oh it's OK - just the old craftsmens style "bent valley".
Oh it's OK - just the old craftsmens style "bent valley".
jar546
CBO
Re: Follow the cord
And I was assuming that the photo was creating an optical illusion. I can see clearly now
And I was assuming that the photo was creating an optical illusion. I can see clearly now
Frank
REGISTERED
Re: Follow the cord
Where is it written that shingled roof sections have to approximate planar surfaces?--curves are soo much prettier.
Where is it written that shingled roof sections have to approximate planar surfaces?--curves are soo much prettier.
Guest
Re: Follow the cord
Frank,
The contractor asked the same question with different words. I pointed out that the curves were not on the approved plans. It is difficult to see in the picture but both sides of the roof had curves and the ridge was way out of level.
The homeowner is a mousy little guy that was very intimidated by the big blustery contractor so I put on my tiger hat.
Frank,
The contractor asked the same question with different words. I pointed out that the curves were not on the approved plans. It is difficult to see in the picture but both sides of the roof had curves and the ridge was way out of level.
The homeowner is a mousy little guy that was very intimidated by the big blustery contractor so I put on my tiger hat.
vegas paul
Silver Member
Re: Follow the cord
I don't see any problem with it... it is the classic inverted eyebrow roof line :lol:
I don't see any problem with it... it is the classic inverted eyebrow roof line :lol:
jar546
CBO
Re: Follow the cord
Yes, and you are quite intimidating with it on!tigerloose said:
JBI
REGISTERED
Re: Follow the cord
What Frank said.
Hey, they work in the Orient, right?
And that sheathing IS ORIENTed Strand Board, right? :lol: :lol: :lol:
(I crack me up!!!)
What Frank said.
Hey, they work in the Orient, right?
And that sheathing IS ORIENTed Strand Board, right? :lol: :lol: :lol:
(I crack me up!!!)