• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Garbage disposal not to interceptor?

Among plumbing notes on plans, MEP engineer's plans say "Waste from garbage disposers shall not drain to grease interceptor." Ergo double sink has one side going to grease trap, other side (w/GD) to sanitary drain.

Plumber says it's crazy, I am scratching my head.

What's the rationale for this?

I've heard that not every sink is like this.
And there are different types.
This is a special model.
Of course, he realized the answers here.
 
2018 IPC....
1003.3.2 Food waste disposers restriction. A food waste disposer shall not discharge to a grease interceptor.


Ultimately, the code official or the public sewer system operators will make the decision on where food waste disposers will be connected.

Talk to your sewer purveyor....
 
Thanks Moscow.

This is IPC land. Grease trap is sized according to EPA formula.

EPA 1 Procedure Formula (# of meals X (4.5) X kitchen loading B KL = trap volume (gal)

Kitchen Loading KL

Food Grinder & Dishwasher 2.50

Without Food Grinder 2.00

Without Dishwasher 1.50

Without Food Grinder & DW 1.00

Engineer specs 1500 gal outside tank, as formula calls for 1100+gal.

(Formula is contained in local ordinance corded vs non corded garbage disposal, which curiously mixes up the terms Interceptor and Grease trap)
Can't see a reason to spend money on a SW for a in-sink disposal, unless I just add an old Gen2 just to match. A KA cannot handle a load, so what are you guys doing to match the look of the C4 lighting.
 
Back
Top