• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Gas meter

ICE

ICE

MODERATOR
Staff member
Joined
Jun 23, 2011
Messages
13,828
Location
California
The Gas Company is making them move the meter. A room addition was built between the house and garage. The Gas Company might be concerned about a flaming dryer vent draped over their meter.



The only permit was a plumbing permit for a gas line. The only reason they got that permit is because the Gas Company won't give them service unless we say okay. Our policy is live and let live so I ignored the addition.
 
Last edited by a moderator:
ICE said:
The Gas Company is making them move the meter. A room addition was built between the house and garage. The Gas Company might be concerned about a flaming dryer vent draped over their meter.

The only permit was a plumbing permit for a gas line. The only reason they got that permit is because the Gas Company won't give them service unless we say okay. Our policy is live and let live so I ignored the addition.
Click to expand...
Two issues would be the meter vent termination, and the piping now is under ground beneath building.
 
If I remember correctly in another post, you were directed to start leaving people alone. This is why you have so many photos. Your area suffered from poor, selective code enforcement and it looks like it is about to go backwards again.
 
Heat transfer, heat up your gas before it enters the building....

Did they tell you it was that way before the bought the home?
 
jar546 said:
If I remember correctly in another post, you were directed to start leaving people alone. This is why you have so many photos. Your area suffered from poor, selective code enforcement and it looks like it is about to go backwards again.
Click to expand...
It has a lot to do with the office manager. I have had eight in sixteen years. Some understand that I am riding herd on a bunch of bandits. Some don't. The current manager is a civil engineer that has zero knowledge about MEP. On top of that there are to be no waves and the contractors know more than we do..... It is after all, their trade.
 
So basically an office manager has the legal authority to override the codes? Was the directive put in writing?

If we don't push back, we are part of the problem. Ask for a directive in writing. I thought CA has a statewide code.
 
MikeC said:
Oh, and I just noticed, no jumper on the water heater ;)
Click to expand...
Good eye Mike. It was a requirement at the time that this was done.

I don't see any screws holding the vent to the draft hood either.

 
You must log in or register to reply here.
Back
Top