• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

IAPMO ES reports

rktect 1

rktect 1

SILVER MEMBER
Joined
Oct 20, 2009
Messages
1,160
Location
Illinois
On a review I asked for a report for the closed cell foam insulation being used in the floor, walls and ceiling to the required R-values specified. The report I got is from the IAPMO, not ICC ES report. The report does state that it is in compliance with the 2006 IRC and IECC and was evaluated in accordance with ICC AC 377 in May of 2008. I can't find this product at the ICC website at the ES report section.

Is IAPMO ES report going to cut the mustard here? I don't really see any reason to stop them from using this product but wanted some input as to other ES reports.

CORBOND III performance insulation.
 
Re: IAPMO ES reports

I would accept (and I have accepted) IAPMO listings and reports that state that the item was tested in accordance with our currently adopted I-code. the most problems I run into is that often, the test reports haven't caught up with the current code we're using (e.g., IAPMO or ICC-ES tested to 03 IBC, we're on the 06).
 
Re: IAPMO ES reports

I am always happy when there is a code evaluation report for a product. :)
 
You must log in or register to reply here.
Back
Top