• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Ideads? Cane detection under TV Monitor Protruding Object

greenbubba

Member
Joined
May 12, 2015
Messages
23
Location
United States
I've written about this before - the proliferation of wall mounted computer and tv monitors protruding more than 4" from wall above 27" and below 80" aff. I work at a large university and we are requiring existing installations be modified to become compliant. Below is an example of new construction (assuming the link works). I'm interested in what others are doing to adapt existing non compliant conditions. This should be permanent (not moveable furniture) and ideally attractive. If you have photos of similar conditions, please post them. It might be fun to post the ugly ones too.

https://drive.google.com/file/d/0B20iNZwP16Z1SW1yQVVBVmVnVFE/view?usp=sharing
 
"something" not very attractive but does the job. Also, what say you as to a maximum viewable mtg. hgt to the bottom of the screen? I already know the answer, "it depends" on ones distance from then screen.
 
The predominate installation has the bottom at around 48" AFF, located in a corridor or lobby, and used as a 'digital bulletin board'.
 
Back
Top