• Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades

Labeling per NEC 312.8(A)(3) Feed Through Conductors

jar546

jar546

Forum Coordinator
Joined
Oct 16, 2009
Messages
11,051
Location
Somewhere Too Hot & Humid
If you have a service that from the load side of the meter-base enclosure then feeds to two service disconnects next to each other, using the first disconnect as a feed through to the second service disconnect, would you still have to comply with NEC 312.8(A)(3)?

If you say yes, since there is no disconnect and they are actually service conductors going through the first/closest disconnect to the meter base, what would you require on the label?
 
You must log in or register to reply here.
Top