• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Lack of space to reply

  1. ↑
    He is only proposing to address the perimeter, what of the interior supports? No interior walls? Under slab membrane?
    Watching too much DIY.
    Inside length of joists will be 14'6". No need for interior bracing.

    And 16' is the maximum withh. Insulation, siding and all, to meet transport requirements. 40 is the length including front deck. Living area will be 34 or so, whatever the stud spacing works out to.

    #33TonyTheTiger, Friday at 4:52 AM
    Spam Report
    Like
(You have insufficient privileges to reply here.)
Page 2 of 2
< Prev12
Thread Status:

Not open for further replies.

This is what I am speaking of, or have you shut Tony down?
 
ADAguy said:
  1. ↑
    He is only proposing to address the perimeter, what of the interior supports? No interior walls? Under slab membrane?
    Watching too much DIY.
    Inside length of joists will be 14'6". No need for interior bracing.

    And 16' is the maximum withh. Insulation, siding and all, to meet transport requirements. 40 is the length including front deck. Living area will be 34 or so, whatever the stud spacing works out to.

    #33TonyTheTiger, Friday at 4:52 AM
    Spam Report
    Like
(You have insufficient privileges to reply here.)
Page 2 of 2
< Prev12
Thread Status:

Not open for further replies.

This is what I am speaking of, or have you shut Tony down?
Click to expand...
Ok, I see the same thing now. That thread has been locked for no further replies.
 
Yeah, I believe we were being trolled so I decided to lock out the thread. It was going nowhere and way beyond any compliant installation with an adamant "i'm going to do this anyway" attitude. I did not see the value in the thread so I locked it.
 
I was going to reply that his 2x8s spanning 15 ft. would make a very bouncy floor, and got the same message. Then I noticed that the thread had been locked.
 
You must log in or register to reply here.
Back
Top