1. ATTENTION returning members. If you are coming here from the old forum for the first time, you will need to reset you password. However, we had an email problem getting password reset links set out to a lot of the email addresses. That problem is temporarily rectified but IF you still have an issue, email me direct at info@thebuildingcodeforum.com and I will give you a temporary password.
    Dismiss Notice
  2. Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by clicking here: Upgrades
    Dismiss Notice

Low Voltage Wiring Securing

Discussion in 'Electrical Codes' started by jar546, Nov 10, 2018 at 9:16 AM.

  1. jar546

    jar546 *****istrator

    Joined:
    Oct 16, 2009
    Messages:
    5,656
    Likes Received:
    244
    This is way too common and rarely if ever enforced.

    NEC 800.133(B) pretty much covers this. Do you just ignore this? It becomes the domino effect then eventually creates hazards for the electrician.

    Screen Shot 2018-11-10 at 9.11.25 AM.png
     

Share This Page