• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Occupancy Classification?

Mech

REGISTERED
Joined
Oct 30, 2009
Messages
1,054
Location
Eastern PA
2009 IBC

640 sf mechanical building housing an industrial air compressor, dryer, blowers, dehumidifiers, PLC, etc. for an adjacent lime silo at a cement manufacturer. All the equipment is used to transport the lime through pipe.

Would this be a Utility group?

Thanks
 
Although lime isn't normally combustible, wouldn't it be an F-1 in this case- haha, kidding

The lime is intended to burn in this cement making process.

I would interpret it as being part of the F-2 process.
 
Accessory occupancies are in the same building as the main occupancy and do not occupy more than 10% of the floor area. If this is a separate building occupied 100% by this mechanical room I would classify it as what it is, not subsidiary or accessory to an occupancy in a different building.

Could still be an F-2, but I would ignore the rest of the site and concentrate on what is going on inside this building.

Tim
 
Back
Top