Permitting requirements

[KlauderCo]

In the State of Alaska what are the guidelines or requirements for when you must submit drawings stamped and signed by a licensed architect?

 

[mark handler]

Unstamped plans are only acceptable if they meet the exceptions outlined in Alaska Statute 08.48.311 as follows:

"Sec. 08.48.331. Exemptions. This chapter does not apply to:

1. a contractor performing work designed by a professional architect or engineer or the supervision of the construction of the work as a supervisor or superintendent for a contractor;
2. workers in building trades crafts, superintendents; supervisors, or inspectors in the performance of their customary duties;
3. an officer or employee of the United States Government practicing architecture, engineering, or land surveying as required by the person's official capacity;
4. an employee or a subordinate of a person registered under this chapter if the work or service is done under the direct supervision of a person registered under this chapter;
5. associates, consultants, or specialists retained by a registered individual, a partnership of registered individuals, or a corporation authorized to practice architecture, engineering, or land surveying under this chapter, in the performance of professional services if responsible charge of the work remains with the individual, the partnership, or a designated representative of the corporation;
6. a person preparing drawings or specifications for
   1. a building for the person's own use and occupancy as a single family residence;
   2. farm or ranch buildings, unless the public health, safety, or welfare is involved;
   3. a building that is intended to be used only as a residence by not more than four families and that is not more than two stories high;
   4. a garage, workshop, or similar building that contains less than 2,000 square feet of floor space to be used for a private noncommercial purpose;
7. a specialty contractor licensed under AS 08.18 while engaged in the business of construction contracting or designing systems for work within the specialty to be performed or supervised by the specialty contractor, or a contractor preparing shop or field drawings for work that the specialty contractor has contracted to perform;
8. a person furnishing drawings, specifications, instruments of service, or other data for alterations or repairs to a building that do not change or affect the structural system or the safety of the building, or that do not affect the public health, safety, or welfare;
9. a person who is employed by a post secondary educational institution to teach engineering, architectural, or land surveying courses; in this paragraph, "post secondary educational institution" has meaning given in AS 14.48.210;
10. an officer or employee of an individual, firm, partnership, association, utility, or corporation, who practices engineering involved in the operation of the employer's business only, and further provided that neither the employee nor the employer offers engineering services to the public; exclusions under this paragraph do not apply to buildings or structures whose primary use is public occupancy."

Exceptions 8 and 10 are further clarified as follows:

Exception (g): "alterations or repairs to a building that do not change or affect the structural system or the safety of the building, or that does not affect the public health, safety or welfare."

As a matter of policy, the Sitka Building Department will accept unstamped/unsealed plans if the project is valued at less than $50,000; the alteration or repair is uncomplicated; and the plans submitted are detailed enough to answer all key/essential items for the plan review and are complete enough so that a list of additional information or details is not required. As a guideline, if over 10 additional items are annotated, the plans are not complete enough for review.

Exception (10): allows for unstamped/unsealed plans if the plans are drafted by and received from the owner.

As a matter of policy, the Building Department may accept plans under this exception using the following criteria:

1. The building cannot be open to the general public on a regular basis; and
2. The plans must be received from the owner or the owner's employee, not a third party contractor, temporary employee, or draftsman.

In addition, Exception 10 requires that the building/structure must be an uncomplicated project and the plans must contain enough detail to provide all key/essential information to complete the review. As a guideline, if over 10 items an required, the plans are not complete enough for review.

All building structures of Type A (assembly), E (educational), H (hazardous), I (institutional), or R-l (residential) over four units, or buildings which require an area separation wall, fire protection system or is a mixed occupancy, are to be considered complicated and stamped/sealed plans are required.

While the above criteria offers a guide to the circumstances under which we may accept unstamped/unsealed plans, the Building Department still has the authority to order stamped/sealed plans on any building where drawings submitted are not, in our estimation, sufficient for review. In such a case our justification for requiring signed/stamped plans will be in writing if requested, and the decision will be discussed with the builder. This process is to ensure uniformity.