mark handler
SAWHORSE
PLAYING WITH FIRE
Code or no code, cost or no cost, fire safety is an issue builders and manufacturers can't afford not to get right—now
http://www.builderonline.com/design/playing-with-fire_o
By Les Shaver BUILDER Magazine
Inside its Kelso, Wash.–based Western Fire Center, just across the river from Portland, Ore., Boise Cascade Co. is testing new solutions monthly with one goal in mind—to develop I-joists that can meet the International Code Council’s (ICC) requirement that a floor assembly stand up to fire for 15 minutes. “We’re talking to coating manufacturers and chemical companies” says Dennis Huston, vice president of sales and marketing for Boise. “We test and research everything.”
That research is warranted.
In 2014, 2,419 Americans could have used more time to get out of their homes. That’s how many people died in residential fires, according to the U.S. Fire Administration. Overall, fire fatalities are down—3,900 people died in homes 10 years earlier (and fire deaths fell 26% from 2002 to 2011). Smoke alarms have helped.
But as fatalities fall, evidence exists that new a threat lurks—in the form of new, modern homes and furnishings that present dangers not found in homes built a generation ago.
Recent research says open floor spaces can fuel fires faster in today’s house versus one of 30 years ago. But that’s only part of the problem. Today’s furniture and drapes, often manufactured with synthetics, can go up in flames quicker than the furnishings of yesteryear. For instance, Underwriters Laboratories reports that modern chairs release peak heat in 4 minutes and 20 seconds, while older chairs released peak heat in just over 15 minutes.
And that’s not the only problem.
“When you look at products [in the home] everything is synthetic,” says Peg Paul, communications manager for the Home Fire Sprinkler Coalition (HFSC). “Once that product is on fire, it’s a whole different type of poisonous burn that’s toxic.”
The fire threat is real, and Boise isn’t alone among manufacturers trying to give people more time to escape a burning home. Building product manufacturers are working on products that extend the amount of time occupants have to get out of a home or suppress the fire altogether. These initiatives could mean life or death in some instances.
But, for myriad reasons, builders haven’t lined up to adopt such products. Code confusion gets blamed in some cases. In others, the issue is cost—with home building associations’ fighting against fire protection measures in local and state codes. But as these technologies evolve and fire’s threat explodes, builders may need to pay more attention.
The Building Materials
Larry Zarker, CEO of the Building Performance Institute, thinks building a home that stands a better chance of surviving fire may mean going back in time—something today’s builders and home buyers are loath to do.
“If fire is enough of a concern, the best choice is to look at the materials that go into the construction,” he says. “I don’t think anybody is going to go back and plaster walls, but they could use a fire-resistant drywall.”
Instead of turning back the clock, myriad building products manufacturers are pushing fire-retardant technology forward.
“It’s not about saving the structure,” says Ben Skoog, vice president of growth and innovation for Nashville, Tenn.–based LP Building Products. “It’s about giving folks more time to get out of the building.”
LP offers FlameBlock Fire-Rated OSB Sheathing, which sports an exterior OSB sheathing with a magnesium oxide coating. The company currently is experimenting with other technologies that could make materials—like wood—fire resistant. Maybe it’s an overlay, a coating, a laminate, or, under a best-case scenario, a chemical
treatment that is cost effective, maintains all the workability features, and retards fire. In a kitchen (from 2007 to 2011, cooking caused 43% of home fires, according to the National Fire Protection Association), Skoog thinks an innovation in floors, ceilings, walls or a different approach to cabinets could be very effective.
“There are more parts to the house that burn other than structural members or exterior claddings,” he says. “Let’s look at the fire resistance of interior panels and furnishings, like a replacement for drywall or case goods that slows down fire spread. If you can keep rooms from going to the flashover stage [when the entire room is engulfed in flames], you could help save lives that way. If you can build a room out of fire-resistant materials, you can possibly delay that flashover point by 10 or 15 minutes or sometimes even an hour.”
Tacoma, Wash.-based Eco Building Products got into the game with Eco Red Shield. The product, protected by a coating that controls the moisture in lumber and protects the lumber from mold, wood-rot, termites, and fire, according to the company.
The Sprinkler Fight
While the building industry continues to work on technologies to withstand fire, code officials seem to be leaning in another direction.
“Over the last 10 or 15 years, the trend has gone from passive to active fire detection—sprinklers and smoke detection as opposed to fire-rated walls,” says James Langhorne, a 30-year veteran of the California Fire Service and currently a consulting Fire Protection Engineer.
Unlike the sophisticated wood coatings, sprinklers are not a new technology. First introduced in the Theatre Royal in the United Kingdom in 1812, they’re now mandated in California and Maryland.
They’ve met resistance in other states. In 2012, Alabama adopted the 2009 International Residential Code, but opted not to impose the code’s fire sprinkler installation standard. In 2009, several states passed legislation to block government-mandated sprinkler codes. Minnesota recently passed a bill requiring sprinklers in homes larger than 4,500 square feet, but the measure got shot down in the courts.
NAHB officials, who declined a request to comment for this article, sharply oppose sprinkler laws, citing a litany of factors. They include installation cost; housing affordability; freezing concerns in cold climates; more complex design, installation, and inspection requirements (that increase costs); and liability for failures in installation.
Colorado—in the news lately for wildfires—is a state where home builders successfully pushed back on sprinkler mandates. Todd Anderson, chief operating officer of Colorado Springs–based Challenger Homes, says the mandate would have added roughly $15,000 to the price of a home.
“It would add $18,000 in sales price,” he says, adding that sprinklers don’t help much when it comes to wildfires. “There were heavy lobby dollars spent on those things, and some municipalities are stuck with it now.”
Chicago area builder and remodeler Mike Hudek of Del Mar Builders says it costs $8,000 to $12,000 to install a sprinkler system. If a water main needs to be dug, it’s another $8,000 to $12,000.
“You want everyone to be safe, and I certainly think there are things they could do better,” Hudek says. “I understand the cost aspect that you’re going to be passing on to the consumer. How do you put a price tag on it? If you’re talking to a guy who is struggling to support his family and you hit him with thousands of dollars of bills because the code requires it, he’s going to look at you and say, ‘I won’t build. I’ll go rent.’”
Flooding is another issue with sprinkler systems that concerns Hudek, though Langhorne says those can usually be solved by better installation training.
“We’re having activations that occur that don’t have to do with fire,” Langhorne says. “‘How stable are these sprinkler systems?’ is becoming a question. Best practices need to be incorporated into what we’re doing.”
But Lorraine Carli, vice president of outreach and advocacy for the NFPA, contends that isn’t a common scenario. “Only the sprinkler closest to the fire typically activates,” she says. “Most fires are contained and controlled by one sprinkler.”
Beyond questions of flooding, the sprinkler debate comes down to the core issues of costs and effectiveness. Just how much is enough to spend on something that, by all accounts, can save lives?
“Home fire sprinklers reduce the chance of dying in a home fire, give people time to escape, and offset the impact that we’re seeing with the way homes are being built today,” says Carli, who contends sprinklers cost about $1.35 per square foot.
As with I-joists and coating, sprinkler technology is also evolving. Manufacturers have developed partial sprinkler systems to protect places where a lot of fires break out—such as the basement—while also saving money.
“They serve a purpose,” Hudek says of partial systems. “I see having one in a utility room with furnace and water heater, but to require a whole house to be sprinkled is overkill.”
Continued on next post
Code or no code, cost or no cost, fire safety is an issue builders and manufacturers can't afford not to get right—now
http://www.builderonline.com/design/playing-with-fire_o
By Les Shaver BUILDER Magazine
Inside its Kelso, Wash.–based Western Fire Center, just across the river from Portland, Ore., Boise Cascade Co. is testing new solutions monthly with one goal in mind—to develop I-joists that can meet the International Code Council’s (ICC) requirement that a floor assembly stand up to fire for 15 minutes. “We’re talking to coating manufacturers and chemical companies” says Dennis Huston, vice president of sales and marketing for Boise. “We test and research everything.”
That research is warranted.
In 2014, 2,419 Americans could have used more time to get out of their homes. That’s how many people died in residential fires, according to the U.S. Fire Administration. Overall, fire fatalities are down—3,900 people died in homes 10 years earlier (and fire deaths fell 26% from 2002 to 2011). Smoke alarms have helped.
But as fatalities fall, evidence exists that new a threat lurks—in the form of new, modern homes and furnishings that present dangers not found in homes built a generation ago.
Recent research says open floor spaces can fuel fires faster in today’s house versus one of 30 years ago. But that’s only part of the problem. Today’s furniture and drapes, often manufactured with synthetics, can go up in flames quicker than the furnishings of yesteryear. For instance, Underwriters Laboratories reports that modern chairs release peak heat in 4 minutes and 20 seconds, while older chairs released peak heat in just over 15 minutes.
And that’s not the only problem.
“When you look at products [in the home] everything is synthetic,” says Peg Paul, communications manager for the Home Fire Sprinkler Coalition (HFSC). “Once that product is on fire, it’s a whole different type of poisonous burn that’s toxic.”
The fire threat is real, and Boise isn’t alone among manufacturers trying to give people more time to escape a burning home. Building product manufacturers are working on products that extend the amount of time occupants have to get out of a home or suppress the fire altogether. These initiatives could mean life or death in some instances.
But, for myriad reasons, builders haven’t lined up to adopt such products. Code confusion gets blamed in some cases. In others, the issue is cost—with home building associations’ fighting against fire protection measures in local and state codes. But as these technologies evolve and fire’s threat explodes, builders may need to pay more attention.
The Building Materials
Larry Zarker, CEO of the Building Performance Institute, thinks building a home that stands a better chance of surviving fire may mean going back in time—something today’s builders and home buyers are loath to do.
“If fire is enough of a concern, the best choice is to look at the materials that go into the construction,” he says. “I don’t think anybody is going to go back and plaster walls, but they could use a fire-resistant drywall.”
Instead of turning back the clock, myriad building products manufacturers are pushing fire-retardant technology forward.
“It’s not about saving the structure,” says Ben Skoog, vice president of growth and innovation for Nashville, Tenn.–based LP Building Products. “It’s about giving folks more time to get out of the building.”
LP offers FlameBlock Fire-Rated OSB Sheathing, which sports an exterior OSB sheathing with a magnesium oxide coating. The company currently is experimenting with other technologies that could make materials—like wood—fire resistant. Maybe it’s an overlay, a coating, a laminate, or, under a best-case scenario, a chemical
treatment that is cost effective, maintains all the workability features, and retards fire. In a kitchen (from 2007 to 2011, cooking caused 43% of home fires, according to the National Fire Protection Association), Skoog thinks an innovation in floors, ceilings, walls or a different approach to cabinets could be very effective.
“There are more parts to the house that burn other than structural members or exterior claddings,” he says. “Let’s look at the fire resistance of interior panels and furnishings, like a replacement for drywall or case goods that slows down fire spread. If you can keep rooms from going to the flashover stage [when the entire room is engulfed in flames], you could help save lives that way. If you can build a room out of fire-resistant materials, you can possibly delay that flashover point by 10 or 15 minutes or sometimes even an hour.”
Tacoma, Wash.-based Eco Building Products got into the game with Eco Red Shield. The product, protected by a coating that controls the moisture in lumber and protects the lumber from mold, wood-rot, termites, and fire, according to the company.
The Sprinkler Fight
While the building industry continues to work on technologies to withstand fire, code officials seem to be leaning in another direction.
“Over the last 10 or 15 years, the trend has gone from passive to active fire detection—sprinklers and smoke detection as opposed to fire-rated walls,” says James Langhorne, a 30-year veteran of the California Fire Service and currently a consulting Fire Protection Engineer.
Unlike the sophisticated wood coatings, sprinklers are not a new technology. First introduced in the Theatre Royal in the United Kingdom in 1812, they’re now mandated in California and Maryland.
They’ve met resistance in other states. In 2012, Alabama adopted the 2009 International Residential Code, but opted not to impose the code’s fire sprinkler installation standard. In 2009, several states passed legislation to block government-mandated sprinkler codes. Minnesota recently passed a bill requiring sprinklers in homes larger than 4,500 square feet, but the measure got shot down in the courts.
NAHB officials, who declined a request to comment for this article, sharply oppose sprinkler laws, citing a litany of factors. They include installation cost; housing affordability; freezing concerns in cold climates; more complex design, installation, and inspection requirements (that increase costs); and liability for failures in installation.
Colorado—in the news lately for wildfires—is a state where home builders successfully pushed back on sprinkler mandates. Todd Anderson, chief operating officer of Colorado Springs–based Challenger Homes, says the mandate would have added roughly $15,000 to the price of a home.
“It would add $18,000 in sales price,” he says, adding that sprinklers don’t help much when it comes to wildfires. “There were heavy lobby dollars spent on those things, and some municipalities are stuck with it now.”
Chicago area builder and remodeler Mike Hudek of Del Mar Builders says it costs $8,000 to $12,000 to install a sprinkler system. If a water main needs to be dug, it’s another $8,000 to $12,000.
“You want everyone to be safe, and I certainly think there are things they could do better,” Hudek says. “I understand the cost aspect that you’re going to be passing on to the consumer. How do you put a price tag on it? If you’re talking to a guy who is struggling to support his family and you hit him with thousands of dollars of bills because the code requires it, he’s going to look at you and say, ‘I won’t build. I’ll go rent.’”
Flooding is another issue with sprinkler systems that concerns Hudek, though Langhorne says those can usually be solved by better installation training.
“We’re having activations that occur that don’t have to do with fire,” Langhorne says. “‘How stable are these sprinkler systems?’ is becoming a question. Best practices need to be incorporated into what we’re doing.”
But Lorraine Carli, vice president of outreach and advocacy for the NFPA, contends that isn’t a common scenario. “Only the sprinkler closest to the fire typically activates,” she says. “Most fires are contained and controlled by one sprinkler.”
Beyond questions of flooding, the sprinkler debate comes down to the core issues of costs and effectiveness. Just how much is enough to spend on something that, by all accounts, can save lives?
“Home fire sprinklers reduce the chance of dying in a home fire, give people time to escape, and offset the impact that we’re seeing with the way homes are being built today,” says Carli, who contends sprinklers cost about $1.35 per square foot.
As with I-joists and coating, sprinkler technology is also evolving. Manufacturers have developed partial sprinkler systems to protect places where a lot of fires break out—such as the basement—while also saving money.
“They serve a purpose,” Hudek says of partial systems. “I see having one in a utility room with furnace and water heater, but to require a whole house to be sprinkled is overkill.”
Continued on next post