• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Post Foundation for Addition -Done correctly

Does the pier foundation look adequate?

  • Yes

    Votes: 0 0.0%
  • No

    Votes: 0 0.0%
  • Need more information

    Votes: 2 100.0%

  • Total voters
    2

Chris38610

REGISTERED
Joined
Aug 19, 2017
Messages
2
Location
Rochester NY
We are interesting in buying a house but are concerned that the 13'x13' addition does not have the correct foundation. Photo attached. Current homeowner has permit but never had any of the inspections done so can not supply a certificate of compliance for the addition, deck or pool.

I'm an electrical contractor so building codes aren't my expertise.

Thoughts?

30969624_zpid
 
I am not on the residential or structural side

But just looking at the few pictures, to me the addition does not look pretty.

After buying two houses, and making a couple mistakes,,

If it were me, I would find my on residential structural engineer to look at it and give professional opinion.

It will be worth the money for the peace of mind to either buy or walk away.

Not sure how that city handles permits, but if they come looking for an inspection and it is not right, you might have some problems
 
insufficient information, besides the posts what is the beam and josit sizes, what is in the ground for pier bases, the hand rail and lack of guuards on the basement stairs is an issue, and all decks scare me, especially if the homeowner built them
 
I would not permit this without an engineered design per IRC 403.1 (2012), without a continuous foundation and wall it has no lateral bracing. (Though I see them all the time.) And the code gives no prescriptive way to size the caissons to carry all of the concentrated loads. So even assuming the framing is adequate I don't see a prescriptive way to do it. I have seen lots that have shifted and/or settled.
 
Hire a Licensed Design Professional, to many un-answerable questions to dive into on a forum.

As others have said, that pool barrier assembly is a concern as well. Door alarms not visible, gate/barrier height, gate swing over stairs, latch height, 4by4 posts appear notched & on and on my list would go.

Frankly I wouldn't purchase a house or building completed without inspections, you may have a difficult time going through the process after the fact with the authority having jurisdiction.
 
Back
Top