• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Proper Occupancy Classification for 7000sf Natural Gas Compressor Building

retire09

Silver Member
Joined
Feb 19, 2010
Messages
365
Location
Alaska
A plan is being proposed for a 7000sf building housing two large compressors used to inject compressed natural gas into a subsurface storage reservoir. The project is in an extremely cold climate otherwise the compressors would be outside and no building occupancy would be required. The compressors are fueled by natural gas. The designers are asking to consider an F-1 occupancy classification for the building in the hope that they can avoid the requirements associated with an H-2 occupancy.

Is this a reasonable Occupancy Classification for this type of facility?
 
F-1 sounds right. Request gas detection for everyone's safety, though, since the natural gas is not odorized at that point.
 
retire09,

Will this structure be sprinkled? Does the system use more than 30 lbs. [ i.e. - `06 IBC, Table

307.1(1) - Closed System ]?

I'm leaning towards the H-2, ...convince me otherwise. :)

.
 
So is thing setting on an open piece of land with not much else around it???

And does it have a big a fan pushing alot of air through the building??

And as you say mainly there for weather protection?
 
The building will have gas detection that will activate an exhaust system and also shut down all gas and electrical supplies.
 
Back
Top