• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Roof Sheathing

InspMO

Bronze Member
Joined
Oct 20, 2009
Messages
41
Location
KCMO
Is there anyone out there that still sees lumber roof sheathing as described in R803.1 on with asphalt shingles :?:
 
Re: Roof Sheathing

InspMo,

I've seen some in Shawnee, Oklahoma on new home construction within the past few months. Back in the 60's and 70s; we used demensional lumber (boards) for roof and shiplap for sub-flooring. We installed shiplap diaganoly for sub-flooring; and then added plywood sheathing or hardwood flooring on top. Had no clue that there even was a code, much less Section R503 requirements. Maybe they came by and took pictures and notes. :)

An advantage of using demensional lumber (spaced using 8d nail) on the roof; was that roof leak damage was usually confined to small areas where you could cut out the bad spots and replace it with just a small length of board.

Uncle Bob
 
Re: Roof Sheathing

Sadly, no I haven't seen any on new buildings.

Most of the repairs to older buildings replace it with OSB or plywood.

On those older buldings I often see shiplap used for the wall sheathing as well as the roof and sub-flooring. Typically with cement/concrete remnants on them as the boards were first used as forms to pour the foundation walls, then re-used as sheathing.

Talk about limiting waste on a project! Or should I say 'green building techniques'... :o
 
Re: Roof Sheathing

InspectMo, We have a few houses in Willow Springs Mo. using this.
 
Back
Top