• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Seals for fueling stations

jar546

jar546

CBO
Joined
Oct 16, 2009
Messages
13,000
Location
Not where I really want to be
They were not quite ready for inspection in this area but wanted me to sign of on another area so they could backfill. Temperature during this project never got above 22 F. I did an inspection 3 days after the seals were "set" and they were still goopy. They never actually hardened.

514-2.JPG
 
Probably needs to be removed. The sealing compound manufacture installation instructions for the most I have seen need to have a temperature of at least 40 degrees for at least 8 hours I beleive off memory.
 
You must log in or register to reply here.
Back
Top