globe trekker
Registered User
- Joined
- Oct 19, 2009
- Messages
- 1,739
Greetings to all!
Is there a standard, or code section to reference when considering the "required" 1/2"
anchor bolts listed in Section R403.1.6, 2006 IRC (i.e. - shear values, pull out
capacities, other technical info., etc.). Possibly an ASTM, or ANSI, or ACI-318
standard?
Rather than telling someone that a 1/2" diameter anchor bolt is required, is there a
specific standard that I can refer to for technical guidance?
Thanks ya`ll!
.
Is there a standard, or code section to reference when considering the "required" 1/2"
anchor bolts listed in Section R403.1.6, 2006 IRC (i.e. - shear values, pull out
capacities, other technical info., etc.). Possibly an ASTM, or ANSI, or ACI-318
standard?
Rather than telling someone that a 1/2" diameter anchor bolt is required, is there a
specific standard that I can refer to for technical guidance?
Thanks ya`ll!
.