Spray foam insulation & spray applied roof coating system

[Mac]

Anybody have experience with these types of roofing systems?

We have a proposal for reroofing a municipal Emergency Services building, and documentation of the system is sparse. I haven't been able to locate an ICC-ES report either. Any help would be repaid "in-kind"!

 

[Coug Dad]

can you provide a little more information?

 

[imhotep]

Anybody have experience with these types of roofing systems? We have a proposal for reroofing a municipal Emergency Services building, and documentation of the system is sparse. I haven't been able to locate an ICC-ES report either. Any help would be repaid "in-kind"!

You wouldn't happen to be referring to Temp-Coat 101?

http://www.tempcoat.com/temp-coat-products/temp-coat-101/prod_2.html

I have a client who is proposing this coating to provide the weather protection to a blast resistant factory assembled structure.

 

[Mac]

All I have is a sale brochure - it's called EnduraPlus, produced by EnduraTech.

 

[RLGA]

I specify it all the time. The community college district here uses it as their standard.

You can find all the ICC-ES reports here: http://www.icc-es.org/reports/index.cfm?csi_num=07 57 00&view_details

 

[imhotep]

I specify it all the time. The community college district here uses it as their standard.You can find all the ICC-ES reports here: http://www.icc-es.org/reports/index.cfm?csi_num=07 57 00&view_details

You specify EnduraPlus manufacture by EnduraTech or another product? Inquiring minds.

 

[RLGA]

I don't specify a specific product; my specification is somewhat performance-based. I require a Class A covering (the community college district requires an FM 1A-90, which requires a Class A roof covering) and foam that complies with ASTM C 1029 having a minimum density of 3 pcf per ASTM D 1622.

I specify acrylic coatings, but others are available, such as urethane, silicone, and a variety of cementitious coatings. The community college district requires mineral granules be applied to the wet coating and allowed to cure; then another acrylic coating is applied to lock in the granules.

 

[imhotep]

I don't specify a specific product; my specification is somewhat performance-based. I require a Class A covering (the community college district requires an FM 1A-90, which requires a Class A roof covering) and foam that complies with ASTM C 1029 having a minimum density of 3 pcf per ASTM D 1622.I specify acrylic coatings, but others are available, such as urethane, silicone, and a variety of cementitious coatings. The community college district requires mineral granules be applied to the wet coating and allowed to cure; then another acrylic coating is applied to lock in the granules.

Thank you.