Sifu
SAWHORSE
- Joined
- Sep 3, 2011
- Messages
- 2,811
This is way out of my wheelhouse and I am seeking to expand my knowledge. I have an elevator in an open parking gargae that is the accessible MOE. It does not require an area of refuge, but does require adherence to:
1009.4.1 Standby power. The elevator shall meet the
emergency operation and signaling device requirements of
Section 2.27 of ASME A17.1/CSA B44. Standby power
shall be provided in accordance with Chapter 27 and Section
3003.
So the question is does this section ONLY require meeting the "emergency operation and signaling device requirements" of ASME 17.1 2.27? Or, the entire section of 2.27? Can these requirements even be broken out? I have an older version of the standard (2004) so what I am reading may not be the same today, but it is more of a general scoping question.
1009.4.1 Standby power. The elevator shall meet the
emergency operation and signaling device requirements of
Section 2.27 of ASME A17.1/CSA B44. Standby power
shall be provided in accordance with Chapter 27 and Section
3003.
So the question is does this section ONLY require meeting the "emergency operation and signaling device requirements" of ASME 17.1 2.27? Or, the entire section of 2.27? Can these requirements even be broken out? I have an older version of the standard (2004) so what I am reading may not be the same today, but it is more of a general scoping question.