• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Table 1004.1.1 labeling

Yikes

SAWHORSE
Joined
Nov 2, 2009
Messages
4,103
Location
Southern California
Not sure whether to put this here or in the "code administration" forum - -

Why can't table 1004.1.1 have reference numbers added to each type of occupant load?

For example, the first item in the table, "Accessory storage areas, mechanical equipment room" could be referred to as T1004.1.1.1.

"Business Areas" could be T1004.1.1.9, since it is the ninth item in the table.

As it currently is listed, if my client wants his space labeled "office", my natural inclination is to look on the table for the word "office". About one minute later, I find "business area". However, if there was a number reference on 1004.1.1, I think it would make for much more efficient use of the table.

The old UBC used to number the functions of space this way. Why can't the IBC do it as well?
 
My suggested solution is to go back to the UBC. It would cure a lot of ills.
 
Back
Top