With a townhouse apartment project, if you start code review in building code (CBC based on IBC in California), you will define it as an R-2 occupancy group, since there are more than two attached dwellings. That leads you to Table 503, which lays out max height & area based on construction type, obvioulsly aiming for V-B non-rated...
Next, see what CRC, based on IRC, has to say about it. Residential code puts it in R-3 occupancy group. No mention of max floor area right?, though it does specify must be no more than three stories in height. So in theory you could do a row of townhouses that goes on for miles, one unit after another, with properly detailed fire resistive common walls between them?
Also, I am asking, since CRC applies, we only need to do code review under that code, no need to even consider the implications of the CBC right? Other than applicable sections such as Ch.11A for accessibility as referred to by the residential code, of course.
I just want to prevent the trouble of having to design under both codes at the same time.
Next, see what CRC, based on IRC, has to say about it. Residential code puts it in R-3 occupancy group. No mention of max floor area right?, though it does specify must be no more than three stories in height. So in theory you could do a row of townhouses that goes on for miles, one unit after another, with properly detailed fire resistive common walls between them?
Also, I am asking, since CRC applies, we only need to do code review under that code, no need to even consider the implications of the CBC right? Other than applicable sections such as Ch.11A for accessibility as referred to by the residential code, of course.
I just want to prevent the trouble of having to design under both codes at the same time.