• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Using Gravity

ICE

MODERATOR
Staff member
Joined
Jun 23, 2011
Messages
13,824
Location
California
They put a bunch of holes in this shot roof. Note the lack of wire management.

IMG_5151.JPG


This looks like they remembered that there's equipment at the last moment. That's an access aisle for the fire dept.... on the plans anyway.

IMG_5149.JPG

IMG_5149 2.JPG
 
I was replacing a roof on a bank branch in northern virginia. The western part, not close to DC. Sloped Flat roof on bar joists, it was a gypsum deck with a membrane on top. The scope was to R&R the membrane and a few other minor items. Good old boy contractor hired by the landlord, they stripped everything off and went home for the day. Stoopid. Everybody know if you strip a roof you tarp it, even more important for a gypsum deck. And storm were predicted that night. And it did.

Gypsum roofs are interesting. Compressed fiberboard, like ceiling tiles, were laid on the joists, then gypsum was mixed up and poured over the surface about 2” thick, then the waterproof membrane is applied. As long as the gupsum stays dry it has enough strength to walk on. If i5 gets wet, it turns to mush. Bank employees came to work the next morning, the entire roof had collapsed into the branch. Made a terrible mess.
 
Back
Top