conarb
REGISTERED
In specifying materials I need the names of products to meet CBC 704A.2. As far as a ridge vent apparently a screened vent like Award's vent approved as ER-6171, apparently the code doesn't require fire dampening, only screening. I also need continuous soffit venting in stucco soffits, my suppler of plaster products has gone out of business so I need a brand of a compliant dampened soffit ventilation system.
Some time ago when debating sprinklers one of the nice fire guys gave me the names of some approved fire-dampened products but I can't find where I put them.704A.2 Attic ventilation.704A.2.1 General. When required by Chapter 15, roof and attic vents shall resist the intrusion of flame and embers into the attic area of the structure, or shall be protected by corrosion-resistant, noncombustible wire mesh with 1/4"inch (6 mm) openings or its equivalent.
704A.2.2 Eave orcomice vents. Vents shall not be installed in eaves and cornices.
Exception: Eave and cornice vents may be used provided they resist the intrusion of flame and burning embers into the attic area of the structure.