• Welcome to The Building Code Forum

    Your premier resource for building code knowledge.

    This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.

    Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.

    Ready to upgrade? Log in and upgrade now.

Wind turbine system (interactive)

earshavewalls

Bronze Member
Joined
Oct 21, 2009
Messages
77
Location
Southern California
We have a City project for a new gymnasium that will include 9 wind turbine generators on the roof. I am very familiar with photo-voltaic system requirements but have not yet reviewed a wind turbine system. All of the information I can find shows that a storage battery system is to be used with this system even if it is to be utility interactive. This does not make much sense to me. There is not indication of a storage battery system being a part of the installation other than on the panel schedule sheet having a schedule for an "Emergency Battery Inverter" to power two lighting circuits. This, again, makes no sense if this is an interactive system.

I am on my second review of this project and asked for complete information on the system to be installed. I got 'some' information back, but not enough to determine any level of compliance.

Is anyone familiar with this type of a system? The are specifying a PacWind SeaHawk Vertical Axis Wind Turbine with a MorningStar TriStar-60 Controller. The single line diagram they provided for the system as well as the connection to the building service does not appear compliant. The first service bus they hit has a 600a bus, but is being fed from a 600a main breaker, but has only a 20a breaker for the turbine system (9 turbines). This is not compliant with the 2005 NEC (2007 California Electrical Code) as this code does not permit the 20% overage as does the 2008 NEC (except for residential).

The questions I have are.....is a storage battery system required for this type of system and why? Am I being too cautious? Is the basic design for a wind turbine system the same as a photo-voltaic (modules=turbines, combiner box, inverter, disconnects, etc.)? I am again frustrated that this type system has not been directly addressed in the code, along with PV. It only gets a slight mention in the definition of a "Hybrid System."

Any insights would be helpful. Manufacturer information is sparse, at best.
 
Back
Top