The workmanship was good and I could tell that they cared. So whats wrong?
-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
Workmanship
- Thread starter ICE
- Start date
Architect1281
REGISTERED
you mean double the blocking infill does not serve as a header? (center)
anchor bolt washer might be a tad offset from the sill plate? (center right)
and moisture barrier may be difficult to install depending on worker girth
or rodent control provisions and not sure of reason for missing band joist segment
anchors at left, / right of open footing segment?
end bearing / cant see if its there /on space blocking (lower right)
joist spacing change for a reason on left bay (center to top)
Neat sight however
Where's Waldo?
?Is ICE short for In Case of Emergency? - Welcome
anchor bolt washer might be a tad offset from the sill plate? (center right)
and moisture barrier may be difficult to install depending on worker girth
or rodent control provisions and not sure of reason for missing band joist segment
anchors at left, / right of open footing segment?
end bearing / cant see if its there /on space blocking (lower right)
joist spacing change for a reason on left bay (center to top)
Neat sight however
Where's Waldo?
?Is ICE short for In Case of Emergency? - Welcome
mark handler
SAWHORSE
It would be a little bouncy at the crawl space "hole"
High Desert
REGISTERED
The plumber forgot to butcher the second joist. They only cut one of them.
You have a good eye!High Desert said:
Architect1281
REGISTERED
The plumber had to leave something for the electrician to drill through
RJJ
Co-Founder
Agree with Mark, HD & A1281!
Paul Sweet
SAWHORSE
Mark & A1281, they put pressure blocking over the wall opening, so it should be able to carry anything!
mark handler
SAWHORSE
Not if thats where the tub sitsPaul Sweet said:
pwood
REGISTERED
what code section for pressure blocking?Paul Sweet said:
TimNY
REGISTERED
It somewhere between "you know, that section" and "the other section"pwood said:
(FWIW I think I am the only one that appreciated Paul's sarcasm
)
pwood
REGISTERED
me too, that is why i asked that question. so what section was that again?:mrgreen:TimNY said:It somewhere between "you know, that section" and "the other section"(FWIW I think I am the only one that appreciated Paul's sarcasm
Architect1281
REGISTERED
The pressure blocking is in the code section where the framer puts pressure on the building official to accept non compliant construction
usually in Modifications???????????????
usually in Modifications???????????????