Not into sinks but does one of these apply
Requiring it
Call the city and ask?
Rinse/work sink: A single compartment rinse/work sink may be provided in service areas where blenders or similar equipment are rinsed and the three-compartment sink is not located within the area. NOTE: Rinse/work sink will not be a substitute for the requirement of a 3-compartment sink.
Manual Warewashing Sink: All food facilities, except those that have only prepackaged items in their original unopened sealed containers, shall provide a three-compartment
12
warewashing sink with two integral drain boards. The tub compartments shall be large enough to accommodate immersion of the largest piece of equipment and utensils; i.e., minimum
16” x 20” or 18” x 18” by 12” deep. The sink must be free standing (not installed in cabinets). Hot and cold running water under pressure shall be provided to each compartment. When the three-compartment sink is installed next to a wall, a metal “back splash” shall extend up the wall a minimum of eight (8) inches, and shall be formed as an integral part of the unit and sealed to the wall. The manual warewashing sink shall be easily accessible and conveniently located to the food preparation area. CRFC –114099