-
Welcome to The Building Code Forum
Your premier resource for building code knowledge.
This forum remains free to the public thanks to the generous support of our Sawhorse Members and Corporate Sponsors. Their contributions help keep this community thriving and accessible.
Want enhanced access to expert discussions and exclusive features? Learn more about the benefits here.
Ready to upgrade? Log in and upgrade now.
F-2 question.
- Thread starter Jhale
- Start date
Mr. Inspector
SAWHORSE
F2 does need sprinklers if VB construction and more than 13,000 sq ft. or more than 2 stories.
Sifu
SAWHORSE
- Joined
- Sep 3, 2011
- Messages
- 3,320
On a different thread, we discussed trying the AI navigator out. I thought this question would be an interesting test of it.
As you can see, the answer regarding the classification did not generate whether it was an F1 or F2. The answer also does not consider any amounts of gases which might needed to be determined for an H consideration. However, by answering the 2nd question it would appear that it is classifying a welding shop as an F2.
As you can see, the answer regarding the classification did not generate whether it was an F1 or F2. The answer also does not consider any amounts of gases which might needed to be determined for an H consideration. However, by answering the 2nd question it would appear that it is classifying a welding shop as an F2.
mtlogcabin
SAWHORSE
Depends on what you are welding. I worked a year in a "weld shop" repairing damaged tanker trailers that hauled various fuels in them.
Yankee Chronicler
REGISTERED
How does a welding shop get classified as F-2?
Sifu
SAWHORSE
- Joined
- Sep 3, 2011
- Messages
- 3,320
Closest in the list-Metal products (fabrication and assembly)?
Yankee Chronicler
REGISTERED
Judgment call, I guess. Welding involves flames and big sparks. There's no way I'm classifying a welding shop as a "low-hazard" anything.
Having spent a lot of time in fab shops (welding SI), the amount of stored combustible products is very low. Yes, there is a significant potential for ignition given the sparks, heat, etc. However, the flammable gases and materials are well known and addressed through fairly rigorous safety protocols, often via OSHA regulations. As you think about the occupancy classification and the associated hazards, be mindful to think not only about the function of the space but also the products that would be likely to be stored/manufactured/used within the space.