Hello,
I have a situation where the outside air is getting sucked back in through closed dampers.
The exhaust and outside air dampers are controlled by the same signal and the return air damper is controlled inversely to them.
The return fan is controlled by CFM offset method.
There is a building static pressure sensor that controls the relief damper
Not sure where to even start to troubleshoot. Any tips will be much appreciated.
Thanks in advance,
Hoons
I have a situation where the outside air is getting sucked back in through closed dampers.
The exhaust and outside air dampers are controlled by the same signal and the return air damper is controlled inversely to them.
The return fan is controlled by CFM offset method.
There is a building static pressure sensor that controls the relief damper
Not sure where to even start to troubleshoot. Any tips will be much appreciated.
Thanks in advance,
Hoons