• Welcome to the new and improved Building Code Forum. We appreciate you being here and hope that you are getting the information that you need concerning all codes of the building trades. This is a free forum to the public due to the generosity of the Sawhorses, Corporate Supporters and Supporters who have upgraded their accounts. If you would like to have improved access to the forum please upgrade to Sawhorse by first logging in then clicking here: Upgrades

Decorative balusters for stair guards

P

peach

SILVER MEMBER
Joined
Oct 17, 2009
Messages
2,834
Location
metro DC
where exactly do you guys measure the 4-3/8" opening when decorative balusters are used? (Narrowest point, widest point, tread level?).

curious because we've had some discussion; as I recall, the 4-3/8" came in over the 4" at stairs because of tread depth.

thanks
 
measure at the widest point. The 4 3/8 is a minimum that needs to be maintained at all points in the stair guard rail assembly. IMO
 
Between the spindles at the widest point. This is only a minimum, spindles can be closer. If using pool cue spindles, it most likely will take three on each step. Decorative could mean even a smaller spindle being used requiring more spindles on a rail system. (ie 1/2" metal tubing)

Does the measurement change between the 2006 and 2009 I-code?

pc1
 
Agree with all the previous posts. Yes, it was a change driven by the change in tread depth, and how it related to layout of typical balusters, 2 vs. three very narrow. Supported by the fact that children would not spend as much time on a tread, vs. a landing or floor level, hence the opportunity to work themselves through the opening lessens.
 
Peach,

The 4-3/8" is measured the same as the 4" sphere, the sphere is just larger in this area.

I am not sure what more one would need to add, I thought I got it right.
 
mark,

Excellent publication!

I was not aware of the 30 degree rule for risers!

pc1
 
You must log in or register to reply here.
Back
Top